Tagstand
Customer acknowledges ownership of the copyright to the images in this order or having obtained the express written consent of the copyright owner.
Every endeavor has been made to ensure that this digital proof meets with your requirements, please note that the final responsibility rests with you, our valued customer.
This is NOT a film produced proof therefore the colors are approximate color only; the final color(s) on the printed card/tags may differ from this proof.
Pantone colors on final card will match the Pantone color book, special colors will match customer supplied samples.
Print with standard colors as per the artwork provided by customer. Color printing will be within ± 8% tolerance.
NFC Sticker Builder
Description
Configure your NFC tag specifications (chip, material, size, etc) with the drop-down lists and then design with the online editor. If you already have an artwork file, then ensure that it follows our design guidelines below and upload it directly.
Design Guidelines
- Keep text and designs out of the GREEN SAFETY ZONE to provide enough spacing (3mm) from the edge. The green safety zone is for reference only and will NOT BE PRINTED. Delete it after you start designing.
- For background images or anything printed to the edge, provide extra graphics that extend 3mm beyond the edge as shown by the PINK BLEED AREA. The pink bleed area is for reference only and will NOT BE PRINTED.
- For text, use 8 pt font or larger.
- For lines, use a thickness of 0.05mm or greater.
- Uploaded images must be 300 dpi or higher.
SKU: Online Tag Builder for Stickers
Categories: Custom Online NFC Tag Builder, Custom Online Orders, HF Tags, NFC Stickers, NFC Tags, NFC Tags, Type 2 NFC Tags
Tag: NFC for Labeling and Identification
